Select a Specialty Space-Grade Coatings And Paint product:

APTEK 2214-A/B
BLACK Urethane ESD Coating
Space-grade, low modulus, low outgassing, brushable, urethane ESD coating/adhesive. RT or low heat cure. Surface resistivity 4×106 ohms/square. Thinner available for sprayable viscosity.

APTEK 2214LV-A/B
BLACK Urethane ESD Coating
Space-grade, low modulus, carbon-filled, thixotropic, two component, electrically conductive, flexible urethane coating/adhesive designed to dissipate an electrostatic charge.

APTEK 2513-5-A/B
Urethane Coating
White, low solar absorptance, tough but flexible, urethane coating designed for wide operating temperatures of space applications.

APTEK 2515-A/B
Black Urethane ESD Coating
Tough, space-grade, urethane coating designed to dissipate an electrostatic discharge. This system provides a combination of high flexibility and good tensile strength/elongation characteristics. Surface resistivity is in the 10E6 ohms/square range. 

APTEK 2711
WHITE Inorganic ESD Coating
Inorganic, low outgassing, thermally radiative ESD white paint. Specially designed for very high temperature space applications.

APTEK 2711-1
WHITE Inorganic ESD Coating
A white, one-component, semi-rigid, mineral oxide filled, ESD, thermally radiative, room temperature curing, inorganic coating/paint designed for very high temperature space applications of ≥ 700⁰C (1300⁰F). This space-grade paint   is thermally conductive coating where excellent resistance to intense UV light exposure is required. APTEK 2711-1 is the more economical version of APTEK 2711-1 as it is made with Aptek’s proprietary pigment and therefore we can pass on the cost savings to the customer.

APTEK 2717-A/B
BLACK Silicone Adhesive and/or ESD Coating
Two-component, black, low modulus, thixotropic, silicone adhesive displaying very low temperature flexibility and good physical strength properties. Designed to fully cure at room temperature and can be accelerated with a brief low temperature cure. This 100% solids system has been manufactured with highly pure resins to minimize the occurrence of ionic contamination without outgassing during cure or service.

APTEK 2719-A/B
WHITE Silicone ESD Coating
White, flexible, mineral oxide filled, two component, room temperature curing, silicone coating/paint designed for the wide operating temperature ranges of space applications, and was developed for use as a thermally conductive coating where excellent resistance to intense UV light exposure is required.

Notes: The data shown are typical and are not recommended for specification purposes. Consult Aptek Technical Service for more information. These products represent part of our product line. To request other products specification qualifications and further data, please contact us. Refer to product Technical Data Sheets for complete characteristics and properties.