A P T E K L A B O R A T O R I E S , I N C

LOADING

Preloader Loading Cancel.

Optoelectronic Encapsulants

Select a Optoelectronic Encapsulants product:

APTEK 2128-A/B
Urethane Encapsulant/Potting Compound
Water-clear, UV resistant, electrically insulating urethane system designed for the potting/encapsulation of electronic components, substrates, and active chips.

APTEK 6100-1A/B
Epoxy Encapsulant
Optoelectronic grade, water clear encapsulant for IR and visible LED discreet devices. Lower Tg versions available for display devices.

APTEK 6103-A/B
Epoxy Encapsulant
Optoelectronic grade, reddish black encapsulant for IR LED discreets. Transparent to IR light while blocking out visible light.

APTEK 6108-PMF
Epoxy Coating/Encapsulant
High temperature, rigid, electrical/electronic coating or encapsulant. Provides excellent environmental protection for continuous exposure to 220°C.

APTEK 6109-A/B
Epoxy Encapsulant
Optoelectronic grade flexible water clear encapsulant. Higher viscosity/lower Tg version for clear blob-top encapsulation of ceramic substrate devices.

APTEK 6110-A/B
Epoxy Encapsulant and/or Potting Compound
Optoelectronic grade encapsulant/potting compound – will not attack/cloud polysulphone casings. More flexible, ower Tg versionof APTEK 6106-A/B, for good temparaturecycling in ceramic devices.

APTEK 6111-A/B
Epoxy Optoelectronic Encapsulant
Dark red, rigid epoxy system designed for the encapsulation of LED chips in OPTO devices. Provides excellent environment protection and when casted becomes the lens portion of the device designed to be transparent to IR light while blocking visible light and therefore appears black when cast in pass. Displays minimal attack to plastic molds/cases – especially polysulphone and polycarbonate.

APTEK 6114-2-PMF
IR Transmitting/Visible Light Blocking Optoelectronic Epoxy Encapsulant
One component, unfilled, dark brown, rigid system designed for the encapsulation of IR LED chips in OPTO devices. Provides excellent environmental protection and when casted becomes the lens portion of the device designed to be transparent to IR light while blocking out visible light and therefore appears black when cast in mass.

APTEK 6115-PMF
IR Transmitting/Visible Light Blocking Optoelectronic Epoxy Encapsulant
A one component, unfilled, dark brown, rigid system designed for the encapsulation of IR LED chips in OPTO devices. APTEK 6115-PMF provides excellent environmental protection and when casted becomes the lens portion of the device designed to be transparent to IR light while blocking out visible light and therefore appears black when cast in mass.

Notes: The data shown are typical and are not recommended for specification purposes. Consult Aptek Technical Service for more information. These products represent part of our product line. To request other products specification qualifications and further data, please contact us. Refer to product Technical Data Sheets for complete characteristics and properties.